Magnetic LED Module LED Display Vacuum Front Maintenance Tool
Product Description
1. Product schematic
1. Sealing ring
2. Electric engine
3.Switch
4.Handle
5.High and low level regulation with memory function 6.充电口(charging port)
7. Power Indicator
8. Battery
9.Sukcer cup
2 . Tool Description and applicable LED display model
Product weight: Net 1.02kg ,Gross 1.9kg
L*W*H :275*180*170MM
Suction cup size:
1、140*220MM 2、140*150MM 3、140*100MM
Application:All small pitch led display modules, for example P1.2 P1.5 P1.8 P2 P2.5 P2.6 P3
3. Tool Parameter
Battery Model
Charger charging voltage :100-240V
Charger output voltage:26V1A
Continuous discharge duration :20MIN
Power Consumption:350W
Remarks: This data is laboratory data, change according to the use environment, data will fluctuate
Standby power consumption: 10uA
working environment:-20℃-45℃ 15%-85%RH
4. Charging instruction
Plug the charger into the socket, DC end insert into the charging stand, open the main switch,check the charge status through the battery indicator, after being fully charged, turn off the main switch, pull out the charger.
5. Instruction Manual
Operation instructions: hold the tool handle, then align the suction cup with the center of the module, and lightly press the switch button (press the first time to turn on the working state, and the second time to turn it off). The round button adjusts the gear. Gently pull the module out smoothly, hold the module firmly with the other hand, and lightly press the switch button to turn it off.
Remarks: If it is not used for a long time, please store it after fully charging, and charge it regularly to keep the battery fully charged.
Warranty Policy
Normal use, the whole machine is guaranteed for one year
1. Man-made damage such as not using the standard charger, inhaling sundries, soaking in rain, falling from high altitude, dismantling tools without permission, etc. is not covered by the warranty.
2. Tool burnout caused by unstable charging voltage is not covered by the warranty.
3. Due to changes in the charging environment and the frequency of use, there will be a reasonable loss of battery life, and normal battery life loss is not covered by the warranty.
4. It is forbidden to disassemble, impact, squeeze or throw the rechargeable battery pack into fire. If there is severe swelling, please do not continue to use it. Do not place in a high voltage environment.